Filter
Top Products
90
When the correct number is dis-
played, press:
The Abbreviated Dial Number
and the name of the party will
appear on the LCD display for
about 2 seconds.
Your facsimile will automatically
start scanning the document
into memory (if enabled). While
scanning, the facsimile dials,
connects, and starts transmis-
sion.
Once an Abbreviated Dial Num-
ber is programmed with a valid
remote facsimile location, that
location can be accessed by re-
calling the corresponding Abbre-
viated Dial Number.
The document must be loaded
and the resolution and contrast
set before a transmission using
Abbreviated Dialing (see pages
83 and 84).
Press:
+
Enter the Abbreviated Dial Num-
ber (1 to 999) assigned to the
desired party.
NOTE:
When an incorrect number is
entered, use
to delete
preceding digits, or press
once to start over
from the beginning.
Example of Abbreviated Dial
Number, 10:
Abbreviated Dialing
Press the SPEED
DIAL Key
1
Enter the
Abbreviated Number
2
Press the START Key Tray
3
ABB. NUMBER
(1-999) [ ]
ABB. NUMBER
(1-999) [ 10]
Displayed for 2 seconds
During scan to memory
During transmission
NOTE:
When the number entered
(within the range of 1
through 999) is not prepro-
grammed with a specific par-
ty’s facsimile or telephone
number, the message “NUM-
BER NOT LISTED” is dis-
played for 2 seconds and
then the facsimile returns to
the screen in Step 1.
ABB. NBR= 10
LONDON OFFICE
SCANNING DOC P001
FILE NBR = 091
MAY-17 09:43 AM 99%
AUTO RECEIVE
Displayed for 2 seconds
ABB. NBR= 10
NUMBER NOT LISTED