Filter
Top Products
181
This operation is used to re-send
a document after the document
initially failed to be sent. If recov-
ery transmission is set to ON,
the document is stored in the
DP80F/DP85F for resending.
NOTE:
When the Recovery Trans-
mission is set to OFF, an er-
ror tone and “NOT AL-
LOWED NOW” LCD prompt
result when Recovery Trans-
mission is selected.
If there is no document
stored for recovery transmis-
sion, an error tone sounds
and “NO ENTRY” LCD
prompt will be displayed.
Press:
+
+
+
+
Press or to
view the jobs stored for resend-
ing. The information is dis-
played on the LCD display.
When the sending document to
be recovered was sent using the
One Touch key, Abbreviated
Dial Number, Group Number, or
Alphabet Dialing, press:
You can also change the num-
ber of the remote facsimile if di-
aled from the Dial Keypad.
To re-transmit the document or
change the facsimile number,
press
.
Enter the new facsimile number.
If the correct number is entered,
press:
The transmission starts immedi-
ately if the phone line is avail-
able.
Sending Recovery Transmission
Select the Desired
Job
2
Change the
Facsimile Number
3
Display the
RECOVERY
TRANSMIT Menu
1
To start the transmission, press:
To change the number, press:
Press:
Cancel the
Document
4
RECOVERY TX
[ENTER]:START
FILE NBR = 005
12345
2.CHANGE
JOB NUMBER 005
1.START
FAX NUMBER (MAX128)
[12345 ]
2.NO
DELETE JOB NUMBER005
1.YES
To cancel the document, go to
Step 4.