Filter
Top Products
166
Exploring Your Computer’s Features
Using QosmioPlayer
5.375 x 8.375 ver 2.3
Using the Toshiba Remote Control
To begin using your remote control:
1 Point the remote control at the remote control sensor. The
remote control sensor is located on the front of your
computer. Make sure there is nothing blocking the path
between your remote control and the remote control
sensor.
2 If your computer is powered on, turn it off or place it in
Hibernation mode.
3 Perform one of the following steps:
❖ To watch television, press the TV button to start
QosmioPlayer in TV mode.
❖ To play a DVD/CD, press the Media button to start
QosmioPlayer in Media mode.
Once QosmioPlayer starts, you can use the TV and Media
buttons to switch between TV and Media modes.
4 To access the inputs to the TV tuner (S-video, Composite
In, and Antenna In), press the Input button with
QosmioPlayer in TV mode.
5 If you wish to watch television, press the Set Up button
with QosmioPlayer in TV mode to display the
QosmioPlayer Setup menu. Then use the arrow keys to
select the desired options and press OK to accept them.
The Setup menu is important when configuring television for
the first time, because you can use it to scan the available
channels.
NOTE
NOTE