Filter
Top Products
61
Getting Started
Adding memory (optional)
5.375 x 8.375 ver 2.3
12 Firmly press the memory module into the memory slot’s
socket at approximately a 30-degree angle (to the
horizontal surface of the computer).
(Sample Illustration) Inserting the memory module into the
socket
13 Once the module’s connector is fully inserted into the
socket, press downward on the top edge of the module to
seat the module into the latches at the sides of the socket.
These latches should “snap” into place securely with the
corresponding cutouts in the side of the module. If the
latches and cutouts do not line up correctly, repeat steps
12-13.
(Sample Illustration) Pressing down on the memory module
latch
latch