Filter
Top Products
234
Using the TOSHIBA RAID Utility
Creating a new RAID-0 array
5.375 x 8.375 ver 2.3
Before configuring your system for RAID-0, make sure you
back up all data on your computer’s hard drives onto another
storage media. When a RAID-0 array is created, all data on
both your primary and secondary hard disks is erased and
cannot be recovered. Toshiba is not responsible for any loss of
data on your hard disks.
Your computer can only be configured for one type of RAID at
a time. It cannot be configured to use both RAID-0 and RAID-1
simultaneously.
To create a RAID-0 array:
1 Plug in the AC adaptor and power on the computer. (The
computer must be running on power provided by the AC
adaptor to perform these steps.)
2 Insert the Recovery DVD shipped with your computer
into the computer’s CD/DVD drive.
3 Press F12 to display the boot menu.
NOTE