Filter
Top Products
60
Getting Started
Adding memory (optional)
5.375 x 8.375 ver 2.3
9 Carefully remove the new memory module from its
antistatic packaging, without touching its connector.
10 Locate an empty memory module slot on the underside of
the computer.
If no memory slot is available, you must remove a module by
performing steps 2-3 of “Removing a memory module” on
page 63.
If your system has the memory modules stacked on top of one
another, you must remove the top module first before
removing/installing the bottom module.
11 Pick up the memory module by its sides, avoiding any
contact with its connector. Position the module toward
the socket, aligning the connector’s notch with the
matching key in the socket.
(Sample Illustration) Aligning the memory module with the socket
NOTE
NOTE
latch
latch
key
notch
connector