Filter
Top Products
68
Getting Started
Using external display devices
5.375 x 8.375 ver 2.3
To configure a virtual button:
1 Perform steps 1-5 in “Enabling Dual Mode” on page 67.
2 Select the virtual button you wish to configure.
3 Select the desired options, then click OK.
4 Click OK.
5 Click OK to close the Mouse Properties window.
Using external display devices
Your computer comes with a built-in LCD display, but you
can also connect the following types of external display
devices to the video ports described below:
❖ A plasma television or VCR/DVD player via the HDMI
Out port
❖ A standard television, projector, or VCR/DVD player via
the S-video Out port
❖ An external monitor or projector via the RGB (monitor)
Out port
Before connecting a television, video projector, monitor or
other external display device, configure your computer for
the type of device you are connecting. To do this, refer to the
documentation for your operating system and the device.
(Sample Illustration) Back of system
You cannot connect both the S-video Out port and the HDMI
Out port to the same device at the same time.
The system display default is set at the factory to S-video Out.
Coaxial Antenna In port
S-video Out port
HDMI Out port
RGB (Monitor) Out port