Filter
Top Products
250
Using the TOSHIBA RAID Utility
Rebuilding the data on the secondary disk in a RAID-1 array
5.375 x 8.375 ver 2.3
5 Click Mirroring.
The Confirm disk mirroring window appears.
(Sample Image) Confirm disk mirroring window
6 Click OK.
7 The Confirm disk mirroring window appears.
(Sample Image) Confirm disk mirroring window
8 Click OK.
The computer begins copying data from the internal hard disk
to the secondary hard disk drive.
The time required to rebuild the array may vary, depending
on the amount of data to be copied.
The progress of the rebuilding process can be viewed on the
TOSHIBA RAID Console window.