Filter
Top Products
MS860 WiFi Manual
NETWORK SETTINGS
28
USING SCM FOR SCANNER NETWORK SETTING
Step 1: Install Scanner Configuration Manager (SCM) from the User
Guide CD and double click the SCM icon on the desktop.
Step 2: Click “Tools” / “Wi-Fi Setup”, and the “Welcome to WiFi Setup
Wizard” screen appears.
NETWORK SETTINGS
There are two methods to configure your scanner to its IP settings
(obtained from your Network Administrator) - via Scanner Configuration
Manager (SCM) and via manual bar code scanning. SCM has the
advantage in that it’s quick and easy, and works for most situations.
Direct bar code scanning (starting on page 16) offers full “hands on”
control over your MS860’s IP settings, but can be tedious.
4. Keep the default settings of the server port and server IP.
Note
1. The PC which run moniter.exe utility should detect the IP address
itself and the IP address should be act as TCP server. If Server IP is
different from the one which the monitor.exe detected, you may assign
it by yourself.
2. You should not change the Server port & Server IP if you want to
use the PC which run moniter.exe utility to act as the TCP server.
3. If your PC want to manage all scanners in the subnet, you
should assign different server port for each scanner, you may use the
default settings which monitor.exe utility provide.
4. You may use “Clear” button to remove Virtual com port settings,
after remove, the “used” state should be disabled.