Filter
Top Products
MS860 WiFi Manual
SCANNER CONFIGURATION MANAGER
Bar Code Symbologies
Modify the output characteristics of 16 of the most popular bar code
symbologies in current use. Following are the bar code symbologies
and their modifiable parameters.
Code 39
z
Enabled toggles the ability for the scanner to read Code 39 on or off.
Default is “Yes”.
z
Code ID (Standard) is a user-definable identification letter for
Standard Code 39, which is referred to in the “Use Code ID”
function on page 45.
Default is letter “M”.
z
Code ID (Full ASCII) is the same as Code ID (Standard), above,
except that the symbology is Full ASCII Code 39.
Default is also letter “M”.
z
Type toggles Code 39 between Standard and Full ASCII.
Default is “Full ASCII”.
z
Check Digit defines whether or not a check digit (to insure data
accuracy) is calculated, and if so, whether it should be sent or not.
Default is “Not Calculate”.
z
Send Start/Stop toggles sending or not sending start/stop senti-
nels (* in the case of Code 39).
Default is “No Send”.
z
Minimum Length defines the minimum length the user will accept
for a valid bar code.
Default is “0”.
z
Maximum Length defines the maximum length the user will accept
for a valid bar code.
Default is “48”.
48