Filter
Top Products
MS860 WiFi Manual
SCANNER CONFIGURATION MANAGER
50
Bar Code Symbologies, continued
Standard 2 of 5 / Toshiba Code (China Postal Code)
z
Enabled toggles the ability for the scanner to read S 2 of 5 / Toshiba
Code on or off.
Default is “No”.
z
S25 Code ID is a user-definable identification letter for S 2 of 5,
which is referred to in the “Use Code ID” function on page 45.
Default is letter “H”.
z
Fix Length (by first 3 reads) fixes the length of acceptable subse-
quent bar code reads from the first three bar codes read. Useful as
a data verification if all bar codes are of a consistent length.
Default is “No”.
z
Check Digit defines whether or not a check digit (to insure data
accuracy) is calculated, and if so, whether it should be sent or not.
Default is “Not Calculate”.
z
Toshiba Code ID is the same as S25 Code ID (above) but instead
applicable to Toshiba Code.
Default is letter “C”.
z
Minimum Length defines the minimum length the user will accept
for a valid bar code.
Default is “10”.
z
Maximum Length defines the maximum length the user will accept
for a valid bar code.
Default is “64”.