Filter
Top Products
MS860 WiFi Manual
NETWORK SETTINGS
29
Step 4: Select wireless network type.
Select “Yes” for DHCP on, “No” for
DHCP off.
Step 5:
Step 6: If DHCP “Off” is selected, fill in the IP
Address, Subnet Mask, and Gate-
way. Click “Next”.
Step 7: Select whether your wireless net-
work is using WEP encryption for
data security. Click “Next”.
Step 3: Fill in the SSID name of the Access
Point (AP). Click “Next”.
Scan data and send data via WiFi:
1. After you have set the network configuration for your scanner and
set the virtual com port, you are ready to scan data and transmit them
to your server thru the WiFi.
2. When your scanner connected to the WLAN, the flashing green
LED on the scanner turn into steady green.
3. On your PC, select “Start” > “Program” > “Accessories” >
“Communication” > “Remote Terminal”.
4. Enter a name for the connection. Then, select the com port for
the connection (You must select the com port that you have
configured in VCOM, pg 23), click “OK”.