Filter
Top Products
MS860 WiFi Manual
SCANNER CONFIGURATION MANAGER
Characters must be bracketed by <> symbols.
Letters and numbers should be represented in hexadecimal format
(accessable in a linked menu) to avoid confusion. For instance, the
lower-case letter “t” should be entered as <74> and the numeral “5”
should be entered as <35>.
Function codes (F keys, Cursor Up, Enter, etc.) can also be inserted
via hexadecimal code (accessable in a linked menu).
Even if the original bar code data is not modified, if additional charac-
ters are to be added (see “Add New” below) the original Start Param-
eter must be defined as From Position “1” and the End Parameter
defined as “All Remaining”, otherwise, none of the original data will be
output.
Note:
Data Editing, continued
Add New adds characters (printing and non-
printing) to the data output from the MS860.
These characters can be added before, after, and
within the actual scanned data. Pre-defined
characters include:
<>>
z
> (greater than)
<<>
z
< (less than)
<dd>
z
Character in hexadeximal notation
<“>
z
(quotation marks)
<*>
z
Interblock Delay (data editing)
<a>
z
Any Letter (data editing)
<d>
z
Any Digit (data editing)
<n>
z
Line Feed
<r>
z
Carriage Return
<t>
z
Tab
Delete removes existing modifier strings.
Move Up / Move Down (pictured to the right) moves the
modifiers up and down in relation to each other. The top modifier
will be performed first and each one down the list will be per-
formed in sequence. The original data (modified or unmodified,
part or whole) will be output according to its position in the modifier
sequence.
58