Filter
Top Products
MS860 WiFi Manual
SCANNER CONFIGURATION MANAGER
Bar Code Symbologies, continued
Delta Code
z
Enabled toggles the ability for the scanner to read Delta Code on or off.
Default is “No”.
z
Code ID is a user-definable identification letter for Delta Code,
which is referred to in the “Use Code ID” function on page 45.
Default is letter “D”.
z
Calculate Check Digit toggles whether or not to calculate a check
digit.
Default is “Yes”.
z
Send Check Digit toggles sending or not sending a check digit.
Default is “Send”.
Code 11
z
Enabled toggles the ability for the scanner to read Code 11 on or off.
Default is “Yes”.
z
Code ID is a user-definable identification letter for Code 11, which is
referred to in the “Use Code ID” function on page 45.
Default is letter “J”.
z
Send Check Digit Number defines the check digit .
Default is “Send”.
z
Send Check Digit toggles sending or not sending a check digit.
Default is “Send”.
z
Minimum Length defines the minimum length the user will accept
for a valid bar code.
Default is “3”.
z
Maximum Length defines the maximum length the user will accept
for a valid bar code.
Default is “48”.
EAN-8
z
Enabled toggles the ability for the scanner to read EAN-8 on or off.
Default is “Yes”.
z
Code ID is a user-definable identification letter for EAN-8, which is
referred to in the “Use Code ID” function on page 45.
Default is letter “FF”.
z
Send Leading Digit toggles sending or not sending a leading
(‘start bar code’) digit.
Default is “Send”.
z
Send Check Digit toggles sending or not sending a check digit.
Default is “Send”.
55