Filter
Top Products
MS860 WiFi Manual
SCANNER CONFIGURATION MANAGER
Bar Code Symbologies, continued
EAN-13
z
Enabled toggles the ability for the scanner to read EAN-13 on or off.
Default is “Yes”.
z
Code ID is a user-definable identification letter for EAN-13, which is
referred to in the “Use Code ID” function on page 45.
Default is letter “F”.
z
Send Leading Digit toggles sending or not sending a leading
(‘start bar code’) digit.
Default is “Send”.
z
Send Check Digit toggles sending or not sending a check digit.
Default is “Send”.
z
Bookland EAN toggles whether or not to send the EAN-13 bar
code data in Bookland EAN (ISBN) format.
Default is “No”.
UPC-E
z
Enabled toggles the ability for the scanner to read UPC-E on or off.
Default is “Yes”.
z
Code ID is a user-definable identification letter for UPC-E, which is
referred to in the “Use Code ID” function on page 45.
Default is letter “E”.
z
Send Leading Digit toggles sending or not sending a leading
(‘start bar code’) digit.
Default is “Send”.
z
Send Check Digit toggles sending or not sending a check digit.
Default is “Send”.
z
Zero Expansion adds 0s to the bar code output to change the
UPC-E output format (8 digits) to UPC-A format (12 digits).
Default is “No”.
z
Enable NSC=1 allows the output of a UPC-E bar code containing a
first digit (Number System Character) of “1”.
Default is “No”.
54