Filter
Top Products
MS860 WiFi Manual
SCANNER CONFIGURATION MANAGER
Bar Code Symbologies, continued
Code 93
z
Enabled toggles the ability for the scanner to read Code 93 on or
off.
Default is “Yes”.
z
Code ID is a user-definable identification letter for Code 93, which
is referred to in the “Use Code ID” function on page 45.
Default is letter “L”.
z
Minimum Length defines the minimum length the user will accept
for a valid bar code.
Default is “1”.
z
Maximum Length defines the maximum length the user will accept
for a valid bar code.
Default is “48”.
MSI / Plessey Code
z
Enabled toggles the ability for the scanner to read MSI / Plessey
Code on or off.
Default is “Yes”.
z
MSI Code ID is a user-definable identification letter for MSI Code,
which is referred to in the “Use Code ID” function on page 45.
Default is letter “O”.
z
Send Check Digit toggles whether or not to send a check digit.
Default is “No Send”.
z
Plessey Code ID is the same as MSI Code ID (above) but instead
applicable to Plessey Code.
Default is letter “P”.
z
Minimum Length defines the minimum length the user will accept
for a valid bar code.
Default is “10”.
z
Maximum Length defines the maximum length the user will accept
for a valid bar code.
Default is “64”.
z
Check Digit Formula defines the formula to calculate the check
digit. Options are:
Default is “Double Module 10”.
Double Module 10
Module 11 Plus 10
Single Module 10
52