Xantrex Technology PROsine 2.0 Projector User Manual


 
445-0089-01-01 IX-1
A
Abbreviations and Acronyms v
ABYC compliance A–4
ABYC Warning label 1–8, B–3
AC Bad Cause 4–18, 6–3
AC Breaker Size 3–6, 4–5, 4–7
AC cabling 3–6
AC circuit breaker 3–5
AC disconnect devices 3–5
AC distribution center. See AC source panel and AC load
panel.
AC fuses
3–5
AC input wiring connections 3–12
AC load panel
defined
3–6
illustrated 3–4
AC output neutral bonding 3–6
AC panel options
15A GFCI receptacle and one hardwire output circuit
2–3
one hardwire output circuit 2–3
AC source panel
defined
3–6
illustrated 3–4
AC wire sizes 3–6
AC wiring compartment 2–2, 3–11
air conditioners 1–3
algorithms, battery charge C–2
audible alarm 4–11
auto restart 1–6, 4–5, 4–8, 4–10
B
batteries
dead batteries, charging
1–4
deep-cycle 3–7
first aid when working with viii
frozen 6–4
precautions when working with viii
battery monitor 7–7
Battery Temp jack 2–12, 3–22, 3–23
battery temperature sensor 3–21
attaching to battery terminal 3–21
attaching to side of battery 3–23
cable 3–22
function of 1–2, 1–4
illustrated 2–12
in series installations 7–7
bonding
neutral to ground described
3–13
neutral to ground, series system 7–6
bonding screw
in load panel (series installation)
7–4
location of 3–13
series installations 7–6
settings 3–14
breaker rating, AC 3–6
BTS. See battery temperature sensor.
C
cable connections, DC 3–19
cable lengths, DC 3–7, 3–17
cable lengths, excessive 3–9
cable sizes, DC 3–7
cable, battery temperature sensor 2–12, 3–22
cable, display panel 2–6, 3–20
cable, series sync 7–4
charge algorithms 1–4, C–2, C–3
charge formulas. See charge algorithms.
Charger LEDs
2–9
Charging 2–6, 2–9
Equalize 2–6, 2–9
Ready 2–6, 2–9
Standby 2–6, 2–9
charger output current vs AC input voltage A–6
Charger switch 2–6, 2–9
chassis ground lug 2–4, 3–19
circuit breakers, AC 3–5
Clear Errors in PROsine 4–6
clocks 6–12
accuracy of 6–12
battery operated 6–12
coffee pots 6–11
compressors 6–11
computers 6–12
configuration
Configure Battery menu
4–12
Configure Display Panel menu 4–11
Diagnostics menu 4–17
entering Configuration mode 4–2
entering Installer-Only mode 4–2
Index