Filter
Top Products
Part 3: Configuration Options
445-0089-01-01 4–17
Diagnostics Menu
Menu Choices or Information Displayed
The screens on the Diagnostics menu are Read-Only. They let you monitor and
troubleshoot the status of your PROsine system. For example, if the unit is
continually recording Warnings about low battery voltage, you can view the
messages and take appropriate corrective action.
The following items appear on this menu:
PS System Mode This screen indicates the present operating mode of the PROsine: invert, bulk
charge, absorption charge, etc.
View Last 20
PROsine Faults
The PROsine records the last twenty PROsine Warnings and Errors. You can
examine these for diagnostic and troubleshooting purposes. See Chapter 6,
“Troubleshooting”.
Warnings end with these characters: -W (e.g,. Batt too hot -W). Error message
are displayed in the same way without the -W at the end.
Clear PROsine
Fault Log
When reviewing a log containing errors it is not always clear what faults are
recent and which are old and not relevant. Select "OK" to clear all entries in the
PROsine fault log - after this any errors in the log must be recent.
Menu Items Access
PS System Mode Read-Only
View Last 20 PROsine Faults
• PROsine Fault #0
•—
• PROsine Fault #19
Read-Only
Clear PROsine Fault Log User
View Last 10 Panel Faults
• Panel Fault #0
•—
• Panel Fault #9
Read-Only
AC Bad Cause Read-Only
View Software Versions:
• LVP Software Revision
• HVP Software Revision
• Display Software Revision
• Display EEPROM Revision
Read-Only
View System Temperatures:
• Panel ambient temp
• Unit Temp #1
• Unit Temp #2
Read-Only
PROsine HVDC Read-Only