Product Orientation
2–10 445-0089-01-01
LCD Panel
The LCD panel lets you monitor the PROsine system and change its configuration
settings. It operates in two basic modes: Data Display and Configuration.
Data Display Mode
• In Data Display mode the screens provide information about PROsine system
performance.
• You can cycle through them by pressing the Up s and Down t
Menu
buttons. (In Data Display mode, the other buttons have no function.)
• Typically, the top line indicates the type of data being displayed and the actual
data appears on the bottom line. A sample screen is shown below:
• Examples of all the Display screens are shown on page 5–10.
Configuration Mode
• In Configuration mode, the screens show data that can be changed as well as
read-only data. (For details about each Configuration screen, see, Chapter 4,
“Configuration”.) Using these screens, you can:
• Define the operating parameters of the PROsine (including AC breaker
size, battery size, battery type, types of charge, load sense capability, etc.)
• Adjust the display characteristics of the panel (including an audible alert,
screen contrast, and screen backlighting)
• View current operational data, Warning messages, Error messages, and
Panel fault messages in order to monitor and troubleshoot system
performance
• Two sample screens are shown below:
PROsine: Battery
12.0V +10A 22
°C
Menu 1: Configure
PROsine—General
AC Breaker Size
*15A