Filter
Top Products
445-0089-01-01 vii
Important Safety Instructions
1. Before installing and using the PROsine 2.0 Inverter/Charger (PROsine), read
all instructions and cautionary markings on the PROsine, the batteries, and all
appropriate sections of this Manual.
2. Do not expose the PROsine to rain, snow, spray, or bilge water. To reduce risk
of fire hazard, do not cover or obstruct the ventilation openings. Do not install
the PROsine in a zero-clearance compartment. Overheating may result.
3. Use only attachments recommended or sold by the manufacturer. Doing
otherwise may result in a risk of fire, electric shock, or injury to persons.
4. The PROsine is designed to be permanently connected to you AC and DC
electrical systems. Xantrex recommends that all wiring be done by a certified
technician or electrician to ensure adherence to proper electrical wiring
regulations.
5. To avoid a risk of fire and electric shock, make sure that existing wiring is in
good condition and that wire is not undersized. Do not operate the PROsine
with damaged or substandard wiring.
6. Do not operate the PROsine if it has received a sharp blow, been dropped, or
otherwise damaged in any way. If the PROsine is damaged, see the Warranty
section.
7. Do not disassemble the PROsine. It contains no user-serviceable parts. See the
Warranty section for instructions on obtaining service. Attempting to service
the PROsine yourself may result in a risk of electrical shock or fire. Internal
capacitors remain charged after all power is disconnected.
8. To reduce the risk of electrical shock, disconnect both AC and DC power
from the PROsine before attempting any maintenance or cleaning or working
on any circuits connected to the PROsine. Turning off controls will not reduce
this risk.
9. The PROsine must be provided with an equipment-grounding conductor
connected to the AC input ground terminal. Grounding and all other wiring
must comply with local codes and ordinances.
WARNING
This chapter contains important safety and operating instructions. Read and keep this
User’s Manual for future reference.
WARNING:Limitations on use
The PROsine 2.0 Inverter/Charger is not intended for use in connection with life support
systems or other medical equipment or devices.