Filter
Top Products
Configuration
4–4 445-0089-01-01
Resetting to Factory Defaults
To reset the PROsine to the factory defaults:
1. Disable Invert and Charge mode.
2. Set the
DISPLAY switch to CONFIGURE.
3. Press Down t
MENU until Configure PROsine—Advanced Menu appears.
4. Press the
ENTER button once.
5. Press Down t
MENU until Reset to Dflts appears.
6. Press the
ENTER button once.
7. Hold down the
ESCAPE and DATA Down t buttons for 3–4 seconds to enter
Installer mode.
8. Press Down t DATA or Up s
DATA until Load Factory appears.
9. Press the
ENTER button once.
Part 2: Configuration Menus and Screens
Table 4-1 shows the organization of the configuration menus and screens. The
screens are grouped into five menus:
• Configure PROsine—Basic
• Configure PROsine–Advanced
• Configure Display Panel
• Configure Battery
• Diagnostics