Filter
Top Products
Introduction
1–6 445-0089-01-01
Auto Restart After
Errors
The PROsine protects itself against numerous conditions (e.g. AC overload or
over temperature) by shutting down. You can program the PROsine to restart
automatically when the cause of the shutdown has corrected itself.
.
Run Without Panel The Run Without Panel configuration setting is an excellent recovery feature that
enables your PROsine to continue running if the display panel is disconnected or
if its communication cable is damaged.
Run Without Panel is factory-set to OFF.
Materials List
Your PROsine 2.0 Inverter/Charger package includes the items listed below. See
Table 1-1.
• 1 PROsine 2.0 Inverter/Charger
• 1 Display panel
• 1 Communications cable (70ft; 21m)
• 1 Battery temperature sensor with a 25ft (8m) cable
• 2 DC terminal covers
• 1 User’s Manual
• 1 Quick Installation Guide (includes PROsine mounting template)
• 1 Mounting template for display panel
• 1 Quick Reference Guide
• 1 ABYC Warning label
Important:
Auto Restart After Errors is factory-set to OFF since this feature can
cause the
PROsine to start unexpectedly and supply AC.