Filter
Top Products
10 Main Menu
122 Wide Format Copy System User Guide
8. Press the Exit key to return to the FILE SYSTEM menu screen.
Change Password
The CHANGE PASSWORD option of the SYSTEM ADMINISTRATION menu allows the system
administrator to change the system administration password.
The default system administration password on all newly delivered machines is 0 (zero). The
system administrator is required to change the password after the initial log in. Immediately
following the log in, the CHANGE PASSWORD screen is displayed. The password must be
changed at that time.
If the existing password has been lost, call for service. The customer service engineer will reset
the password to the default value of 0. The system administrator should then change the
password to a different value.
NOTE: Changing the system administrator password on the Scan System Control Panel also
changes the system administrator password for the Printer. These two passwords
always have the same value.
To change the system administration password:
1. Select the
Menu key.
2. Access the
SYSTEM ADMINISTRATION menu. See "Entering the system
administration password" in this section.
3. Press the
Next key until CHANGE PASSWORD is highlighted.
4. Press the
Enter key to select CHANGE PASSWORD. The CHANGE PASSWORD
screen is displayed.
CHANGE PASSWORD
ENTER OLD PASSWORD:
Change Password Screen
5. Use the numeric keypad to enter the old password.
6. Press the
Enter key to confirm the old password. The CHANGE PASSWORD
screen will instruct you to enter the new password.
CHANGE PASSWORD
ENTER NEW PASSWORD:
Change Password Screen
7. Use the numeric keypad to enter the new password. The password will display as
asterisks.