Xerox 5101 All in One Printer User Manual


 
10 Main Menu
136 Wide Format Copy System User Guide
A: Calibration Roll Drive Gear
12. Press the
Exit key to return to the COMPONENT TESTS menu screen.
Motor Communications
The MOTOR COMMUNICATIONS test is for use by the Customer Service Engineer only. This
test allows the Customer Service Engineer or user, if directed by the Service Engineer, to run a
motor communications loopback test to assist in diagnosing a Scan System problem.
Document Motor
This option allows you to stop and start the document handler motor. When you select this
option, the DOCUMENT MOTOR screen is displayed.
To run the DOCUMENT MOTOR diagnostic:
1. Press the
Menu key. The MAIN MENU screen is displayed.
2. Press the
Next key until DIAGNOSTICS is highlighted.
3. Press the
Enter key to select DIAGNOSTICS. The DIAGNOSTICS menu screen is
displayed.
4. Press the
Next key until SCANNER DIAGNOSTICS is displayed.
5. Press the
Enter key to select SCANNER DIAGNOSTICS. The SCANNER
DIAGNOSTICS menu screen is displayed.
6. Press the
Next key until COMPONENT TESTS is highlighted.
7. Press the
Enter key to select COMPONENT TESTS. The COMPONENTS TESTS
menu screen is displayed.
8. Press the
Next key until DOCUMENT MOTOR is highlighted.
9. Press the
Enter key to select DOCUMENT MOTOR. The DOCUMENT MOTOR
screen is displayed.