Filter
Top Products
8 Special Feature Keys
Wide Format Copy System User Guide 81
• FORWARD prints the collated set in the order that the sheets were scanned. Page 1
will be on the top.
PRINTED
1
2
3
SCANNED
1
2
3
• REVERSE prints the set in the reverse order that they were scanned. Page 1 will be
on the bottom.
1
2
3
SCANNED
3
2
1
PRINTED
3. Regardless of the collation order chosen, if you want a printed copy (checkplot) after you
scan each document, before they are printed as a set, then select the CHECKPLOT box.
4. Press the
Enter key to confirm your choice. The READY TO BUILD SET screen is
displayed.
READY TO BUILD SET
INSERT DOCUMENT: 1
MEMORY
100.0
%
A
UTO
Ready to Build Set Screen
5. Insert each document of the set, one at a time, into the Scan System as prompted by
the display. As the documents are scanned, the amount of memory used is shown in
the rectangular graphical display.
NOTE: You can select reduction/enlargement and copy quality settings for each sheet prior to
scanning that sheet.
6. When the set is completely scanned, press the Sets Build key again. The Sets
Build
indicator lamp is extinguished when the Start key is pressed then the READY
TO PRINT SET screen is displayed.
READY TO PRINT SET
PRESS START TO PRINT
100.0
3
Ready to Print Set Screen
7. If desired, you can now make further changes to the Media Selection, Source selection
and the Reduction/Enlargement value. Any such change will be applied to that printing of
the entire set.
8. Enter the number of copies desired and press the
Start key. The Printer prints the
number of sets requested.