Xerox 5101 All in One Printer User Manual


 
4 Image Quality
50 Wide Format Copy System User Guide
4. Use the Enter key to enable/disable checkbox selection and the Next or Previous
Key to select options with a colon (e.g., FORMAT: TIFF).
The options available for selections displayed on the screen will change depending on the
FORMAT and COMPRESSION that are selected. Listed below are the selections and available
options and their definitions:
PREVIEW - Use this checkbox to enable or disable the generation of a preview
image for your scanned document. Default is enabled (checkbox is checked).
Accxes 13.0 allows for the selection of preview settings Line or Photo.
FORMAT - Use this selection to determine which format you would like to have the
scanned image saved in, TIFF, CALS (1 BIT only) or PDF/A. Default is TIFF.
The screen shown below only appears in the SCAN mode. Additional image quality
selections are available by pressing the Menu key and scrolling to
CONFIGURATION>COPY OPTIONS>IMAGING or CONFIGURATION> IMAGE
ENHANCEMENT. Refer to the Main Menu section of the manual for additional
information on these selections.
SCAN OPTIONS (NORMAL)
9 PREVIEW
FORMAT:
TIFF
Scan Options (Normal) Screen
Type Line
Line — Select Line for an image containing text, line art, or a mixture of these. If the COPY mode
is selected the READY TO COPY screen will be displayed. If the Mode selected is SCAN, and
the Scan-to-Net feature key is installed, the SCAN OPTION (LINE) screen will be displayed.
SCAN OPTIONS (LINE)
9
FORMAT:
TIFF
PREVIEW
Scan Options (Line) Screen
1. Select the Line by pressing the arrow key below the Original, Type key. The SCAN
OPTIONS (LINE) is displayed.
2. Press the Previous or Next key to highlight the scan option you wish to change.
3. Select one of the following:
PREVIEW — DEFAULT IS ENABLED AND A CHECKMARK IS PRESENT IN
THE BOX. PRESS THE ENTER KEY TO ENABLE/DISABLE THE PREVIEW.
WHEN PREVIEW IS ENABLED, A SMALL JPEG (.JPG) FILE IS CREATED
DURING THE SCANNING PROCESS AND STORED ON THE HARD DISK, AS
OF ACCXES 13.0 THE USER HAS THE ABILITY TO SELECT FROM EITHER
LINE OR PHOTO PREVIEWS. THE FREEFLOW ACCXES CLIENT TOOLS