Filter
Top Products
11 Job Accounting
142 Wide Format Copy System User Guide
Job Accounting Mode Menu
The JOB ACCOUNTING MODE menu allows the system administrator to access the function for
enabling or disabling the Job Accounting Mode at the Scan System. Access is restricted to the
System Administrator and requires the entry of the system administration password. It provides a
sub-menu of the following choices:
JOB ACCOUNTING MODE
MODE:
DISABLED
Job Accounting Mode Screen
The job accounting modes are as follows:
• ENABLED - all jobs require a System Administrator assigned valid account number,
• OPTIONAL - a System Administrator assigned valid account number is optional for
any job
• DISABLED - jobs do not require an account number.
To access the Job Accounting menu:
1. Select the
Menu key.
2. Select
System Administration > Job Accounting Mode
3. Press the
Previous or Next key to scroll through the list of options.
4. When the desired option is highlighted, press the
Enter key to select the option. The
menu or screen for the selected option is displayed.
Submitting Jobs
Job Accounting is enabled or disabled on the Scan System and the Printer independently. Job
submission from either device depends on the Job Accounting mode set for the device.
From the Scan System Control Panel
If Job Accounting is ENABLED, the following screen is displayed:
PLEASE ENTER
USER:
Job Accounting Please Enter User Id Screen
NOTE: If Job Accounting Mode is enabled as OPTIONAL, the phrase “OR PRESS ENTER” will
display at the bottom of the screen. No USER ID is required. Press Enter to continue.