Filter
Top Products
Chapter 9. Dial Plan Terminal Menu
61200266L1-1 ATLAS 810
PLUS
User Manual 9-7
»» Search
Write Security: 3; Read Security: 5
Defines to ATLAS the order in which to search for an accept number.
Primary Search
The Search parameter instructs ATLAS which order to search for an accept
number match. Normally all searches are set to primary. The secondary
search selection would be used to force ATLAS to only accept a call at this
endpoint if all primary endpoints were unavailable.
For example, all long distance calls should go out a PRI directly to an IXC
(MCI, ATT, etc.), and local calls should go out a T1 to the LEC. It may be de-
sirable to place long distance calls on the local exchange if all of the IXC
trunks are unavailable (busy or in alarm). In this case, the primary accept
number for the local exchange would be N$, and the secondary accept
would be 1$.
Secondary Search
The same accept rules apply for all secondary number searches as for prima-
ry searches.
»» Data 64K, Data 56K,
Audio, Speech
Write security: 3; Read security: 5
Reflects the attached user equipment (typically a TA) bearer capability. If
the attached TA can only handle digital calls, then a voice call sent to this
endpoint would be rejected.
»» Treat Call As
Allows the incoming call t be treated as the selected call type, regardless of
the actual incoming call type. The default selection
As Received
effectively
disables the feature by using the actual call type.
» Out#Rej
Write security: 3; Read security: 5
Defines the parameters for outgoing calls that ATLAS 810
PLUS
will not send
to the Network.
»» Reject Number
Designates which numbers this particular endpoint will not pass on toward
the Network (PSTN). Use when the outgoing call filter is different for differ-
ent users. The wild cards are identical to the
Outgoing Call Accept
wild
cards. If desired, each User termination port can be set to reject different
numbers.
[0,1]-$ rejects all long distance calls, but only for this User
termination. If permitted in the Network termination endpoint, this
user could not dial long distance numbers while other users could.