Filter
Top Products
Chapter 6. Terminal Menu and System Control
6-12 ATLAS 810
PLUS
User Manual 61200266L1-1
(ESF) DS1. The default value is 132,960 CRC errors for an approximate BER
level of 10E-5.
Total LES Thrsh
The DS1 performance monitor Threshold Value for the Total Line Errored
Seconds (LES) parameter. The default value is 648 for an approximate BER
level of 10E-5.
Total LCV Thrsh
The DS1 performance monitor Threshold Value for the Current 15 minute
Line Code Violations (LCV) parameter. The default value is 133,400 for an
approximate BER level of 10E-5.
» Event Logging
Write security: 3; Read security: 5
Sets the system event severity level threshold for each of the
ATLAS 810
PLUS
system event types. Whenever a system event occurs, that
event is logged if the event’s severity level is equal to or more severe than
the event type’s current threshold setting. See System Event Logging on page
A-1 for detailed information on the system events.
» Syslog Setup
Write security: 3; Read security: 5
Configures the ATLAS Syslog client for use with a Syslog server (supplied
on ADTRAN /Utility disk or available on most UNIX platforms).
»» Transmission
Enables or disables the transmission of log events to the external Syslog
server.
»» Host IP Address
Lists the IP address of the external server that is running the Syslog host dae-
mon.
»» Host Facility
Specifies the facility destination of log events. Facilities are located on the
host and are managed by the Syslog host daemon running on either a UNIX
machine or a PC.
» Real Time Clock
Write security: 3; Read security: 5
Provides access to the following two options that you can review and edit:
»» Current Time/Date
Displays the current date and time, including seconds. To edit this field, en-
ter the time in 24-hour format (such as 23:00:00 for 11:00 pm), and enter the
date in mm-dd-yyyy format (for example, 09-23-1998).
»» Auto Daylight
Savings
When enabled, automatically updates the time and date when Daylight Sav-
ings Time starts and, also, when Standard Time starts.