Filter
Top Products
Chapter 12. ADTRAN Utilities
61200266L1-1 ATLAS 810
PLUS
User Manual 12-11
Only one configuration transfer session (upload or download) may be active
at a time. The TCP/IP parameters are not saved or overwritten as part of an
ATLAS 810
PLUS
unit’s transferred configuration to allow sending identical
configurations to multiple units. When you start this program, a port is au-
tomatically opened.
>
SERVER
MENU
Provides enable, disable, abort, and exit options.
» Enable
Enables the TFTP Server. The IP address displays in the Status field and
Server Ready displays in the Log field.
» Disable
Disables the TFTP Server. When you select this option, the message PORT
CLOSED displays in the Status field and Port Closed displays in the Log
field.
» Abort
Terminates a transfer that is in progress.
» Exit
Terminates active transfers and closes the TFTP window.
>
PRINT LOG
Provides print options.
» ...to Clipboard
Copies the information in the Log field to the clipboard. You can then open
any word processor and paste the information into the program for review.
» ...to Printer
Sends the information in the Log field to the default printer.
» Clear Log
Deletes the information stored in the Log field.
>
HELP
Provides on-line help and version information.
» Contents
Opens on-line help.
» About
Displays version and owner information.
STATUS FIELD
This field displays general information about port and transfer status. This
field is read-only. The unlabeled field in the center of the screen displays
prompts about the status of active transfers, such as bytes transferred and re-
ceived.