Filter
Top Products
Chapter 7. Modules Terminal Menu
7-2 ATLAS 810
PLUS
User Manual 61200266L1-1
» Slt
Write security:3; Read security:5
Identifies the slot number. Slot 0 refers to the ATLAS 810
PLUS
Base Unit.
» Type
Write security:3; Read security:5
Displays the type of module actually installed in the slot or the type of
module you plan to install in the slot. The ATLAS 810
PLUS
automatically
detects the type of module installed in each slot, and the
Type field automat-
ically defaults to the installed module type. You can also use this field to
pre-configure a unit before actually installing modules by specifying the
module that you want to install in each slot.
To use this option, navigate to the field you want to edit and press
Enter. For
empty slots, a list of all the available module types displays. Select the one
you want and it displays in the
Type field. If this field is already configured
with a module, you can only set this field to
Empty.
» Menu
Displays additional status and configuration menus for the selected module.
To access the submenus for this item, use the
arrow keys to scroll to the Menu
column for the module you want to edit, and press
Enter. For detailed infor-
mation on each submenu item, see Modules Menu (Quad T1/PRI) on page 7-4.
» Alarm
Read security:5
Displays whether there is an alarm condition on the ATLAS 810
PLUS
Base
Unit. Press
Enter to access the
Alarm
menu.
» Test
Read security:5
Displays whether the ATLAS 810
PLUS
is executing a test. To initiate a test,
choose the
Menu
submenu on this screen. Then, select the
Test option to
access the screen that allows you to set up and initiate tests. See Test on page
7-2 for details. Press
Enter to access the
Test
menu.
If you install a module in a slot, then want to install a different
type of module in the slot, you must set this field to
Empty
before
selecting another module type.
If a module is installed, the module type automatically shows the
name of the installed module, and it cannot be set to any other
option.