Filter
Top Products
Chapter 12. ADTRAN Utilities
12-14 ATLAS 810
PLUS
User Manual 61200266L1-1
Also, a level 3 or better password is required for performing a configuration
upload. Please consult the ATLAS administrator if level 3 access is not avail-
able.
The
Current Transfer Status
field indicates the transfer progress. If the up-
load succeeds, the unit automatically reboots and runs using the new config-
uration. If the upload fails, an error message displays in the
Previous
Transfer Status
field. If the TFTP Server cannot be contacted, the transfer
attempt times out in approximately 20 seconds.
Instructions for Retrieving a Configuration from TFTP Server
Step Action
1
Use Telnet to
log in
to the ATLAS 810
PLUS
to which you want to
upload a configuration file.
2
Select the
System Utility
menu, then the
Config Transfer
menu.
3
Set the TFTP Server IP Address to the IP address of the machine
running the TFTP Server program. (If you are using the ADTRAN
TFTP Server, the IP address displays in the Status field.)
4
Change the TFTP Server filename to the filename of a previously
saved configuration you wish to load. (Enter the complete
directory path to the file.)
5
Move to the
Load And Use Config
button and press
Enter
to
proceed with the transfer. Respond with
Y
to confirm the transfer
request.
The ATLAS 810
PLUS
reboots immediately after a
configuration successfully loads. No additional confirmation
is requested, and any online sessions are terminated.