Filter
Top Products
Chapter 9. Dial Plan Terminal Menu
61200266L1-1 ATLAS 810
PLUS
User Manual 9-27
After completing the network entries, the Network connection map appears
as shown in Figure 9-6.
7
Back out of the connection to the index number column by
pressing
ESC
on the keyboard.
8
Insert three more connections into the list for the BRI lines by
typing the letter
I
three times.
9
Enter
Out#Accept
and
Out#Reject
numbers for
Slot 1/ Port 1
.
The
Out#Accept
numbers have two entries:
10
Set the BRI switch type (from
Ifce Config
) used by the network to
National ISDN
. From
SPID
, enter the SPID numbers and phone
numbers which match the network provisioning for this BRI line.
11
Press
ESC
to return to the index column,
#
.
Setting PRI B Global Param
Step Action
1
While on the entry for BRI A, type
C
to copy the entire BRI A entry.
2
Move to the next connection list entry and type
P
to paste all of the
BRI data.
3
Move to each field and modify as appropriate for BRI B.
Setting PRI C Global Param
Step Action
1
While on the entry for BRI B, type
C
to copy the entire BRI B entry.
2
Move to the next connection list entry and type
P
to paste all of the
BRI data.
3
Move to each field and modify as appropriate for BRI C.
Setting PRI A Global Param (Continued)
Step Action
Entry 1) 888-01[0,1]X
Entry 2) 888-0120
Allows all numbers 888-0100 to 888-0120