Filter
Top Products
Chapter 12. ADTRAN Utilities
12-6 ATLAS 810
PLUS
User Manual 61200266L1-1
>
SESSION
MENU
Click on
Session
to open the Telnet session.
» Connect
Opens dialog box for
setting
Host Name
and
Port
parameters for a
Telnet session. Also lets
you
Edit Entry
,
Add
New
entry, and
Delete
stored entries. When the parameters are set, click
Connect
to make the con-
nection. Click
Cancel
to end the session.
»» Host Name
Accepts and stores host names. You may either enter a name, an IP address,
or a domain name directly from this field. Click on the drop-down arrow to
display a complete list of previously stored host names.
»» Port
Provides several port options. You may enter port numbers directly into this
field to connect to non-standard ports or select the drop-down combo-box to
display the following options:
»» Edit Entry
Changes either the unit name or
the IP address of each host. Press
either
Tab, Return, or a period (.)
after each number in the IP ad-
dress to move to the next field. If
you press
Return or (.) while the
cursor is located in each IP field,
that field entry is deleted.
»» Add New
Prompts you for the same information as the
Edit Entry
dialog box for new
host. When enabled, the
Use
DNS
(Domain Name Server) feature allows users
to request
Domain Look Up
via a DNS server on the network, rather than spec-
ifying an IP address. The name then appears in the
Host Name
field.
»» Delete
Removes a host name from the list; simply select the host name you want to
remove, and, at the prompt, click
Delete
.
»» Connect
Establishes the Telnet session.
» Disconnect
Terminates the Telnet session.
To re-establish the session, select
Connect
from
Session Menu
or press
En-
ter
three times. This action restores the previous connection.
Telnet
Establishes a Telnet session
Echo
Provides a loopback for troubleshooting
Discard
Bit bucket; discards data
Daytime
Returns the time
Chargen
Displays as a unique character stream; used for self-tests