Filter
Top Products
Chapter 11. SNMP Management
11-6 ATLAS 810
PLUS
User Manual 61200266L1-1
When one of the Total Alert thresholds is exceeded, the corresponding event
bit is set to 1 in the adDS1TotalAlert variable in the DS1 alert table. When en-
abled, ATLAS 810
PLUS
sends alert traps to each member of the trap destina-
tion list upon detecting status bit changes in adDS1TotalAlert. If you have
previously set the corresponding enable bit = 1 in the adDS1TotalArm vari-
able and adDS1AlertEnable = On, then ATLAS 810
PLUS
sends an alarm trap
message. A single alert trap message may report multiple event changes.
ATLAS 810
PLUS
clears the event bits after sending the trap message or send-
ing the response to a Get request for the adDS1TotalAlert variable.
Current Alert and Total Alert described above are Near End events.
ATLAS 810
PLUS
also supports Current Alert and Total Alert for the Far End.
Far End alert traps are generated upon status bit changes in
adDS1FarCurrentAlert for Current Alerts and adDS1FarTotalAlert for Total
Alerts. Current and Total Far End Alerts can be disabled by setting the cor-
responding enable bit = 0 in the adDS1FarCurrentArm and
adDS1FarTotalArm variables, respectively. Far End alert traps can also be
disabled by setting adDS1AlertEnable = Off.
Table 11-5. Total Alert Traps
Total Alert Severity Description
adATLAS800TotalES Warning The total interval errored second threshold has been
exceeded.
adATLAS800TotalSES Warning The total interval severely errored second threshold has
been exceeded.
adATLAS800TotalSEFS Warning The total interval severely errored framing second threshold
has been exceeded.
adATLAS800TotalUAS Major The total interval unavailable second threshold has been
exceeded.
adATLAS800TotalCSS Warning The total interval controlled slip second threshold has been
exceeded.
adATLAS800TotalPCV Warning The total interval path code violations has been exceeded.
adATLAS800TotalLES Warning The total interval line errored second threshold has been
exceeded.
adATLAS800TotalLCV Warning The total interval line code violation threshold has been
exceeded.