Filter
Top Products
ADAM-5000 6-3
Chapter 6
The command set is divided into the following five categories:
• CPU Command Set
• Analog Input Command Set
• Analog Input Alarm Command Set
• Analog Output Modules Command Set
• Digital I/O Modules Command Set
Every command set category starts with a command summary of the
particular type of module, followed by datasheets that give detailed
information about individual commands.
Although commands in different subsections sometime share the same
format, the effect they have on a certain module can be completely
different than that of another. Therefore, the full command set for each
type of module is listed along with a description of the effect the
command has on the given module.
Note: Before setting commands, the user needs to know
the type of main unit being used. If ADAM-5000/485
is being used, the "i" in Si can be set at 0 to 3. If
ADAM-5000E is being used, the "i" in Si can be set
at 0 to 7. This is illustrated in the table below:
Command Syntax
Main Unit
#aaSiCj
ADAM-5000
i = 0 to 3
ADAM-5000E
i = 0 to 7