Filter
Top Products
ADAM-5000 6-91
Chapter 6
$aaSiCjArrff $aaSiCjArrff
Name Configuration
Description Sets the output range, data format and slew rate for a
specified channel of a specified analog output module in
a specified system.
Syntax $aaSiCjArrff(cr)
$ is a delimiter character.
aa (range 00-FF) represents the 2-character hexadecimal
address of the ADAM-5000 system you want to
configure.
SiCj identifies the I/O slot i (i : 0 to 3) and the channel
j (j : 0 to 3) of the module you want to configure.
A is I/O module configuration command.
rr represents the 2-character hexadecimal code of the
output range. (See Appendix B)
ff is a hexadecimal number that equals the 8-bit parame-
ter representing the status of data format and slew rate.
Bits 0 and 1 represent data format. Bits 2,3,4,5 represent
slew rate. The layout of the 8-bit parameter is shown in
Figure 6-4. The other bits are not used and are set to 0.
(cr) is the terminating character, carriage return (0Dh)
Response !aa(cr) if the command is valid.
?aa(cr) if an invalid operation was entered.
There is no response if the module detects a syntax error
or communication error or if the specified address does
not exist.
! delimiter character indicating a valid command was
received.