Filter
Top Products
2-8 ADAM-5000
Installation Guideline
DIN Rail Mounting
The system can also be secured to the cabinet by using mounting
rails. If you mount the system on a rail, you should also consider
using end brackets on each end of the rail. The end brackets help
keep the system from sliding horizontally along the rail. This helps
minimize the possibility of accidentally pulling the wiring loose. If you
examine the bottom of the system, you will notice two small retaining
clips. To secure the system to a DIN rail, place the system onto the rail
and gently push up on the retaining clips. The clips lock the system
on the rail. To remove the system, pull down on the retaining clips, lift
up on the base slightly, and pull it away from the rail.
Figure 2-5 ADAM-5000 Rail mounting
Retaining Clips