Filter
Top Products
ADAM-5000 6-157
Chapter 6
$aaSiCjAhU(data) $aaSiCjAhU(data)
Name Set Alarm Limit
Description Set the High/Low alarm limit value for the specified input
channel of a specified ADAM-5000 system.
Syntax $aaSiCjAhU(data)(cr)
$ is a delimiter character.
aa (range 00-FF) represents the 2-character hexadecimal
address of an ADAM-5000 system.
SiCj identifies the desired slot i and the desired channel j.
AhU is the Set Alarm Limit command.
h indicates alarm type and can have the value H = High
alarm, L = Low alarm
(data) represents the desired alarm limit setting. The
value is from 0 to 4294967295. Be aware that (data) has
10 characters.
(cr) represents terminating character, carriage return (0Dh)
Response !aa(cr) if the command was valid
There is no response if the system detects a syntax error
or communication error or if the specified address does
not exist.
! delimiter character indicating a valid command was
received.
aa represents the 2-character hexadecimal address of the
corresponding ADAM-5000 system.
(cr) represents terminating character, carriage return (0Dh)