Filter
Top Products
ADAM-5000 5-5
Chapter 5
After you have made the changes for a block of parameters, press
<ESC>. You will be asked if you are satisfied with the changes you
have made or not. Answer "Y" to keep the changes you have made or
"N" to leave the values unchanged.
Module Setting
A similar procedure applies for module setting. Note that only the
ADAM-5017 and ADAM-5018 analog input modules provide alarm
functions.
Once module setting is selected, the proper I/O module can be
highlighted. To choose the highlighted module, press <Enter>. If an
analog input module was selected, then options to change I/O type,
Alarm functions or Channel settings are presented.
Pressing <Enter> for each available parameter will present a window
with possible settings. Highlight the preferred setting and press
<Enter> to select.
Channel setting configuration allows you to selectively Enable/Disable
any of the 8 channels numbered from 0-7. This option is only func-
tional in ADAM-5017 and ADAM-5018 modules. Highlight the
channel(s) which you wish to change and press the <Spacebar> to
toggle between enable or disable. Press <Enter> to accept the
change(s) and return to the main menu.
After you have made the changes for a block of parameters, press
<ESC>. You will be asked if you are satisfied with the changes you
have made or not. Answer "Y" to keep the changes you have made or
"N" to leave the values unchanged.
Output Data
If you wish to set the values of a module's outputs, select the proper
module from the screen and press <Enter>. Next, highlight the output
channel and type its value. Note that digital outputs cannot be used
when alarm functions are activated. After you have typed the chang-
es, press <ESC> to exit.