Filter
Top Products
A-6 ADAM-5000
Quick Start Example
Default Factory Settings
Baud rate: 9600 Bits/sec.
Address: 01 (hexadecimal)
The basic hook-up for system configuration is show below:
Figure A-2 ADAM-5000 system hook-up and configuration
The following items are required to configure an ADAM-5000 system:
a personal computer with RS-232 port (baud rate sent to 9600) and the
ADAM utility software.
Configuration with the ADAM Utility Software
The easiest way to configure the ADAM system is by using the
ADAM utility software. The easy-to-use, menu driven software will
guide you through every step of the configuration process. (See
Chapter 5, Utility Software).
13-CHANNEL RTD INPUT
17-CHANNEL T/C INPUT
18-CHANNEL ANALOG INPUT
16-CHANNEL DIGITAL INPUT
14-CHANNEL ANALOG OUTPUT
16-CHANNEL RELAY OUTPUT
18-CHANNEL RELAY OUTPUT
16-CHANNEL DIGITAL OUTPUT