Filter
Top Products
ADAM-5000 6-71
Chapter 6
6.7 Analog Input Alarm Command Set
Note: This command set applies to the ADAM-5013,
ADAM-5017, ADAM-5017H and the ADAM-5018.
Command Syntax Command Name Description
$aaSiCjAhs Set Alarm Mode Sets the High/Low alarm
in either Momentary or
Latching mode.
$aaSiCjAh Read Alarm Mode Returns the alarm mode
for the specified
channel.
$aaSiCjAhEs Enable/Disable Alarm Enables or Disables the
High/Low alarm of the
specified channel
$aaSiCjCh Clear Latch Alarm Resets a latched alarm
$aaSiCjAhCSkCn Set Alarm Connection Connects the High/Low
alarm of a specified
input channel to a
specified digital output
channel
$aaSiCjRhC Read Alarm Connection Returns the alarm limit
output connection of a
specified input channel
$aaSiCjAhU(data) Set Alarm Limit Sets the High/Low alarm
limit value for the
specified input channel
$aaSiCjRhU Read Alarm Limit Returns the High/Low
alarm limit value for the
specified input channel
$aaSiCjS Read Alarm Status Reads whether an alarm
occurred for a specified
input channel