Filter
Top Products
ADAM-5000 6-135
Chapter 6
$aaSiCj5s $aaSiCj5s
Name Set Counter Start/Stop
Description Request the addressed counter/frequency module to
start or stop the counting.
Syntax $aaSiCj5s(cr)
$ is a delimiter character.
aa (range 00-FF) represents the 2-character hexadecimal
address of the ADAM-5000 system.
SiCj identifies the I/O slot i and the channel j of the
module you want to set.
5 is the command for setting counter Start/Stop.
s represents start/stop command.
s=0 indicate stop counter.
s=1 indicate start counter.
(cr) is the terminating character, carriage return (0Dh)
Response !aa(cr) if the command is valid.
?aa(cr) if an invalid operation was entered.
There is no response if the module detects a syntax error
or communication error or if the specified address does
not exists.
! delimiter character indicating a valid command was
received.
? delimiter character indicating the command was
invalid.
aa (range 00-FF) represents the 2-character hexadecimal
address of an ADAM-5000 system.
(cr) is the terminating character, carriage return (0Dh)