Alcatel Carrier Internetworking Solutions 6600 Switch User Manual


 
Configuring High Availability VLANs
Release 5.1.6.R02 User Guide Supplement June 2005 page 3-15
Configuring the Flood Queue Bandwidth
When the first HA VLAN is created on the switch, an ingress flood queue is automatically created for HA
VLAN traffic. By default, the bandwidth size of this queue is set to 15mbps. To change the bandwidth
size, use the vlan port-mac bandwidth command. For example, the following command sets the band-
width value for HA VLAN 200 to 100mbps:
-> vlan 200 port-mac bandwidth 100
Note that when removing HA VLANs from the switch configuration, the flood queue remains in exist-
ence until the last HA VLAN is removed.