Alcatel Carrier Internetworking Solutions 6600 Switch User Manual


 
IPv6 Commands debug ipv6 trace-category
Release 5.1.6.R02 User Guide Supplement June 2005 page 2-25
Usage Guidelines
Use the no form of the command to disable debug messages for a category.
The general and monitor categories are the only ones enabled by default.
Options are additive across multiple command lines until reset with the “default” option.
This command controls only debug level switch log messages (Debug 1,2,3). Messages at higher levels
are always logged.
Example
-> debug ipv6 trace-category all
Release History
Release 5.1.6; command was introduced.
Related Commands
MIB Objects
N/A.
debug ipv6 packet Configures the display of IPv6 debug messages.