Filter
Top Products
IPv6 Commands show ipv6 udp ports
Release 5.1.6.R02 User Guide Supplement June 2005 page 2-53
show ipv6 udp ports
Displays the UDP Over IPv6 Listener Table. This table contains information about UDP/IPv6 endpoints.
show ipv6 udp ports
Syntax Definitions
N/A.
Defaults
N/A.
Platforms Supported
OmniSwitch 6624, 6648, 7700, 7800, 8800
Usage Guidelines
Only endpoints utilizing IPv6 addresses are displayed in this table.
Example
-> show ipv6 udp ports
Local Address Port Interface
------------------------+-------+--------------------
Release History
Release 5.1.6; command was introduced.
Related Commands
output definitions
Local Address Local IPv6 address for this UDP listener. If a UDP listener accepts
packets for any IPv6 address associated with the switch, the value is ::0.
Port Local Port number for the UDP connection.
Interface Name of the interface the listener is using or “unknown.”
show ipv6 tcp ports Displays TCP Over IPv6 Connection Table.