Filter
Top Products
IPv6 Commands ipv6 neighbor
Release 5.1.6.R02 User Guide Supplement June 2005 page 2-13
ipv6 neighbor
Configures a static entry in the IPv6 Neighbor Table.
ipv6 neighbor ipv6_address hardware_address {if_name} slot/port
no ipv6 neighbor ipv6_address {if_name}
Syntax Definitions
ipv6_address IPv6 address that corresponds to the hardware address.
hardware_address MAC address in hex format (e.g., 00:00:39:59:F1:0C).
if_name Name assigned to the interface on which the neighbor resides.
slot/port Slot/port used to reach the neighbor.
Defaults
N/A.
Platforms Supported
OmniSwitch 6624, 6648, 7700, 7800, 8800
Usage Guidelines
Use the “no” form of the command to remove an entry from the IPv6 Neighbor Table.
Example
-> ipv6 neighbor 4132:86::203 00:d0:c0:86:12:07 Test 1/1
Release History
Release 5.1.6; command was introduced.
Related Commands
MIB Objects
IPv6IfIndex
alaIPv6NeighborTable
alaIPv6NeighborNetAddress
alaIPv6NeighborPhysAddress
alaIPv6NeighborSlot
alaIPv6NeighborPort
alaIPv6NeighborRowStatus
show ipv6 neighbors Displays IPv6 Neighbor Table.