ipv6 hop-limit IPv6 Commands
page 2-10 Release 5.1.6.R02 User Guide Supplement June 2005
ipv6 hop-limit
Configures the value placed in the hop limit field in the header of all IPv6 packets that are originated by
the switch. It also configures the value placed in the hop limit field in router advertisements.
ipv6 hop-limit value
no ipv6 hop-limit
Syntax Definitions
value Hop limit value. The range is 0 - 255.
Defaults
Platforms Supported
OmniSwitch 6624, 6648, 7700, 7800, 8800
Usage Guidelines
Use the “no” form of the command to return the hop limit to its default value.
Example
-> ipv6 hop-limit 64
Release History
Release 5.1.6; command was introduced.
Related Commands
N/A.
MIB Objects
ipv6MibObjects
Ipv6DefaultHopLimit
parameter default
value 64