IPv6 Commands ipv6 rip route-tag
Release 5.1.6.R02 User Guide Supplement June 2005 page 2-61
ipv6 rip route-tag
Configures the route tag value for RIP routes generated by the switch.
ipv6 rip route-tag value
Syntax Definitions
value Route tag value. Valid range is 0 – 65535.
Defaults
Platforms Supported
OmniSwitch 6624, 6648, 7700, 7800, 8800
Usage Guidelines
This value does not apply to routes learned from other routers. For these routes, the route tag propagates
with the route.
Example
-> ipv6 rip route-tag 30
Release History
Release 5.1.6; command was introduced.
Related Commands
MIB Objects
alaProtocolripng
alaRipngRouteTag
parameter default
value 0
show ipv6 rip Displays RIPng status and general configuration information.