ipv6 rip status IPv6 Commands
page 2-56 Release 5.1.6.R02 User Guide Supplement June 2005
ipv6 rip status
Enables/disables RIPng on the switch.
ipv6 rip status {enable | disable}
Syntax Definitions
N/A
Defaults
Platforms Supported
OmniSwitch 6624, 6648, 7700, 7800, 8800
Usage Guidelines
RIPng must be loaded on the switch (ipv6 load rip) to enable RIP on the switch.
Example
-> ipv6 rip status enable
Release History
Release 5.1.6; command was introduced.
Related Commands
MIB Objects
alaProtocolripng
alaRipngProtoStatus
parameter default
enable | disable enable
ipv6 load rip Loads RIPng into memory.
show ipv6 rip Displays RIPng status and general configuration parameters.